CARMEX has been conceived with modular engineering and can be configured to perfectly match customer requirements and fit numerous applications: from orthopedics to basic surgery, from urology to cardiology, for interventional radiology to emergency departments.

CARMEX is extremely intuitive to use and easy to move even in very difficult and restricted areas thanks to its compact and light mechanical structure (extensive use of aluminum alloy) also guaranteeing a minimal footprint. CARMEX is also perfectly balanced and does not require continuous use of the brakes in normal use. Wheels are equipped with cable pushers and controlled/braked with a single handle. Thanks to the particular unit balance the front wheels can be easily lifted in order to overcome small obstacles.

The X-ray generator is microprocessor controlled and operates at High Frequency to guarantee precise and stable high voltage generation. CARMEX (3.5 kW or 5 kW) can be equipped with both stationary or rotating anode X-ray tubes, and 7", 9", and 12" image intensifiers are available, all matched to High Resolution CCD cameras. CARMEX RK (5 kW or 15 kW) is equipped with ultra compact CCD camera with 1kx1k pixel resolution for very high performances and excellence in image quality with 9" or 12" I.I.

CARMEX can work in various modes: continuous fluoroscopy, pulsed fluoroscopy, radiography, digital radiography (snap shot). Furthermore, image quality is enhanced by recursive filtering (with motion detection ) for dose/noise reduction and edge enhancement. CARMEX can be equipped with various digital memories that range from basic LIH to advanced DSA applications (roadmapping, max-op, cineloop) with DICOM interface. Video output and thermal printer are also available.

The first system in the world where was installed the Varian PaxScan 2020, it can be equipped with 3030 or king size 4030 panels, to use it in vascular and electrophysiology procedures, with a very large Field of View.

HF Mono-phase 15, 20 or 30kW generators enable “State of the Art” performances.

The dissipation of 500W, obtained using a liquid closed circuit, permits to use the system in any load condition and procedure.

Motorized and remote movements are surely “a must”.

Other obtainable features:
- Acquisition matrix 1 or 3 MP;
- 3D isocentric c-arm geometry;
- Digital System FLY, up to 25 img/s;
- Angio Software;
- Cardio Software;
- Complete DICOM connectivity;
- 19'' monitor;
- Color monitor;
- Third monitor;
- CD/DVD burn on DICOM – JPG – AVI formats.

The multipurpose system, able to satisfy any operator, manageable due to C-arm depth of only 66 cm, powerful with 3D isocentric geometry, motorized movements and Rx housing ready to mount liquid cooling for endless fluoroscopy.

Perfect in orthopedics operations.

Other obtainable features:
- Image intensifier 9'';
- 15kW generator;
- Acquisition matrix 1 MP;
- 3D isocentric c-arm geometry;
- Digital System FLY, up to 6 or 25 img/s;
- Angio Software;
- Complete DICOM connectivity;
- 19'' monitor;
- Color monitor;
- Third monitor;
- CD/DVD burn on DICOM – JPG – AVI formats.

The multipurpose system, able to satisfy any operator, powerful with 3D isocentric geometry, motorized movements and Rx housing ready to mount liquid cooling for endless fluoroscopy.

It can mount generators up to 20kW with a C-arm depth of 69 cm: it can be used in vascular and electrophysiology rooms too.

Other obtainable features:
- Image intensifier 9'';
- 15 or 20 kW generator;
- Acquisition matrix 1 MP;
- 3D isocentric c-arm geometry;
- Digital System FLY, up to 6 or 25 img/s;
- Angio Software;
- Cardio Software;
- Complete DICOM connectivity;
- 19'' monitor;
- Color monitor;
- CD/DVD burn on DICOM – JPG – AVI formats.

The reply to the urologist, endoscopist and vascular needs, extremely versatile and powerful.

Other obtainable features:
- Other obtainable features:
- Image intensifier 12'';
- 15 or 20 kW generator;
- Acquisition matrix 1 MP;
- Rx housing cooling 500 or 1000 W;
- 3D isocentric c-arm geometry;
- Digital System FLY, up to 6 or 25 img/s;
- Angio Software;
- Complete DICOM connectivity;
- 19'' monitor;
- Color monitor;
- CD/DVD burn on DICOM – JPG – AVI formats.

Image Intensifier Mobile C-arm multi-purpose high performance for long time use (Orthopaedics, Urology and General Practice) with Heat Extraction System.

Features:
- Rx Generator 8.2 KW high frequency (120kV-5mA in Fluoroescopy /-100mA 120kV in radiography);
- Rotating anode X-ray tube (focus 0.3/0.6 mm);
- Medical CCD Camera High Definition 1Kx1K;
- Orbital Rotation: +90 ° -45 °;
- Image Intensifier 9 ";
- Forced ventilation system for long periods of use;
- Digital Memory MN8 (HD up to 72,000 images);
- 2 LCD monitors;
Options:
- "Liquid Cooling System" - The cooling system by liquid allows the use of the equipment during an unlimited time without risk of overheating;
- "E-Motion" - System of powering all equipment movements;
- "Battery Pack" - Battery system resource.

Image Intensifier Mobile C-arm multi-purpose use for long times (Orthopaedics, Urology and General Practice) with heat extraction system.

Features:
- Monoblock with rotary anode Rx tube (focus 0.3/0.6 mm);
- Rx Generator 5.5 KW high frequency (120Kv-5mA in fluoroescopy /-100mA 120Kv in radiography);
- Medical CCD camera high definition 1Kx1K;
- Orbital Rotation: 115 ° (+90 ° -25 °);
- Image Intensifier 9 ";
- Monoblock cooling system by forced ventilation for long periods of use;
- Digital Memory MN 8 (HD up to 72,000 images);
- 2 LCD monitors.

Image Intensifier Mobile C-arm multi-purpose use for long times (Orthopaedics, Urology and General Practice).

Features:
- Monoblock with rotary anode Rx tube(focus 0.3 / 0.6 mm);
- X-ray Generator 5.5 KW high frequency (120Kv-5mA in Fluoroescopy /-100mA 120Kv in radiography);
- Medical CCD camera of high resolution;
- Orbital Rotation: 115 ° (+90 ° -25 °);
- Image Intensifier 9 ";
- Digital Memory MD 48 (HD up to 48,000 images);
- 2 LCD monitors.

Image Intensifier Mobile C-arm multi-purpose (Orthopaedics, Urology, General Practice).

Features:
- Monoblock with rotary anode X-ray tube (focus 0,6/1,5 mm);
- Generator 3.3 KW high frequency (110kV, 7,5mA, snapshot 10mA in fluoroescopy / 110kV-125mA in radiography);
- Monoblock Cooling system by forced ventilation;
- Image Intensifier 9 ";
- Medical CCD camera of high resolution;
- Digital Memory up to 330 images;
- 2 Monitors 17";
- Orbital Rotation: 123 º (-33 º +90);
- Vertical movement 500mm, 770mm free space, SID 988mm;
- Laser Collimator motorized, iris collimator.